Best COmputer Tuning Chip
Thread Starter
Teching In
Joined: Apr 2004
Posts: 23
Likes: 0
Best COmputer Tuning Chip im gonna be getting an LS1 ss or trans am within a month and i want my first mod to be a new chip or computer. im thinking probly the HyperTech or Diablo on, but im open to any other ones. can u guys help me with deciding which one to get. i want the most power posible.
or should i do something else for my first mod?
or should i do something else for my first mod?
If you want to do it right the first time and not waste any money, go with either LS1 Edit or HP Tuner.
Hypercrap makes cars very lean, I've seen this about 5-6 times now on the dyno with stock cars.
If your in Ohio, maybe I could help you out with tuning.
Bill
Hypercrap makes cars very lean, I've seen this about 5-6 times now on the dyno with stock cars.
If your in Ohio, maybe I could help you out with tuning.
Bill
Being as you're in south Florida, you really should
go with the Predator (of the two) because there
is the DiabloSport "main man" right there in Delray
Beach, and you can get them to tweak up your
Predator & car on their dyno - bypassing the
"remote tune" deal entirely. In fact you would
probably be best off to go see them personally
and get them to be your dealer / tuner.
go with the Predator (of the two) because there
is the DiabloSport "main man" right there in Delray
Beach, and you can get them to tweak up your
Predator & car on their dyno - bypassing the
"remote tune" deal entirely. In fact you would
probably be best off to go see them personally
and get them to be your dealer / tuner.
TECH Senior Member
Joined: Nov 2001
Posts: 7,036
Likes: 1
From: Lake Zurich, IL
Before you do a chip i'd do all the free mods and some of the boltons ... these car's aren't like others out there where you "put a chip in" (reprogram the PCM) and drop a ton of time off your 1/4 mile ...
If you plan on doing gears, or different height tires right away then a programmer would be great for keeping the Speedo accurate...
But I'd hold off on the programmer until you have more mods ... just my opinion though
If you plan on doing gears, or different height tires right away then a programmer would be great for keeping the Speedo accurate...
But I'd hold off on the programmer until you have more mods ... just my opinion though
