Engine to Dash Pinouts
#1
On The Tree
Thread Starter
Join Date: Nov 2003
Location: WI
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Engine to Dash Pinouts
I am looking for the pinouts of the 2 plugs from the Engine harness that go through the firewall into the car and plug into the Dash harness. Thanks a lot. Need ASAP, in the middle of the wiring process. TIA.
Oh yeah, looking for a harness 99-02. My harness is actually an 02. Thanks.
Oh yeah, looking for a harness 99-02. My harness is actually an 02. Thanks.
#2
There is only one useable dash wire...the oil pressure gauge. The 4th gen feeds serial data to the other gauges, so your 3rd gen can't use that.
You can get a horribly inaccurate tach signal (4cyl waveform) from the traction control pin on one of the C100/C101/C105 connectors, don't recall which offhand.
VSS signal may be useable, I haven't gotten that far yet but it looked like I could reuse the VSS output from the PCM (cruise control, 4K pulse/mi?) for my speedometer.
You can get a horribly inaccurate tach signal (4cyl waveform) from the traction control pin on one of the C100/C101/C105 connectors, don't recall which offhand.
VSS signal may be useable, I haven't gotten that far yet but it looked like I could reuse the VSS output from the PCM (cruise control, 4K pulse/mi?) for my speedometer.