PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

Idle fueling issue after new OS and injectors

Thread Tools
 
Search this Thread
 
Old 06-01-2014, 10:18 AM
  #1  
10 Second Club
Thread Starter
iTrader: (64)
 
dschmittie1's Avatar
 
Join Date: Aug 2005
Location: York, PA
Posts: 2,344
Likes: 0
Received 2 Likes on 2 Posts

Default Idle fueling issue after new OS and injectors

Ok So history on the car. Old setup on the car was a 2 BAR OS and a set of 127# FIC injectors running on E85. Set up was together and running for 2 years with no issues. I was over 90% injector duty Cycle and maxing out my 2 BAR map so after making some changes to the car over the winter to the intercooler and turbo kit (same motor and Turbo) I switched to a set of FIC 2000 injectors and went to a 3 BAR map from DSX tuning.

Now. I can only get the car to idle at 10.5:1 on the gas scale. It is also pig rich on light throttle cruising. If I load the motor I can get good O2 readings.

I have gone through all the injector data. I don't see anything I missed. I have lowered my Base fuel pressure. I have replaced my wide band O2 sensor. I have tried a friends wideband O2. I have moved placement in the exhaust.

I have even leaned the VE table out to the point of the car running funny but to no avail with getting the O2 to read leaner at idle.

In my logs it shows injector duty cycle is around 1-2% and min pulse is 1.9ms

Nothing was changed on the engine this winter other than the MAP and the Injectors.

I am really at a lose with this now. Any help would be great
Attached Files
File Type: hpt
01Firehawk_385_S88_3bar_4.hpt (459.9 KB, 37 views)
Old 06-01-2014, 12:45 PM
  #2  
TECH Resident
iTrader: (1)
 
Russ K's Avatar
 
Join Date: Apr 2006
Location: Regina, Sask
Posts: 809
Received 4 Likes on 3 Posts

Default

Go to Fuel>Transient>Min Fuel Milligrams and lower it to .02. Your at the stock .041 value.

Russ Kemp
Old 06-01-2014, 04:34 PM
  #3  
7 Second Club
iTrader: (7)
 
NicD's Avatar
 
Join Date: Nov 2001
Location: Chandler, AZ
Posts: 2,735
Received 285 Likes on 189 Posts

Default

LOL I just saw this same post and I was like I swear I replied to this, apparently there is another in the fuel section.
Old 06-02-2014, 10:47 AM
  #4  
10 Second Club
Thread Starter
iTrader: (64)
 
dschmittie1's Avatar
 
Join Date: Aug 2005
Location: York, PA
Posts: 2,344
Likes: 0
Received 2 Likes on 2 Posts

Default

Yes it was posted 2 placed and HPT forum. And that fixed it thanks guys.



Quick Reply: Idle fueling issue after new OS and injectors



All times are GMT -5. The time now is 11:28 AM.