After my cam change
#1
FormerVendor
Thread Starter
iTrader: (1)
Join Date: Feb 2002
Location: Waldorf, MD
Posts: 3,059
Likes: 0
Received 0 Likes
on
0 Posts
After my cam change
I noticed when I log data the car hardly goes into decel mode (FTC=21). Is this a product of the car pulling higher MAP values during decel and not triggering the DFCO. If so what do I need to change this so that it hits FTC 21. I need to save every penny of gas teh car is consuming
#3
FormerVendor
Thread Starter
iTrader: (1)
Join Date: Feb 2002
Location: Waldorf, MD
Posts: 3,059
Likes: 0
Received 0 Likes
on
0 Posts
Shes running fine considering I still havent gotten it tuned. A little on the lean side but nothing access and LFA cant handle. I got good values all the way from 400-3200 rpm and right now just waiting ont he cable to flash. After that I will make some passes from 3000-6.5 or 6.7k to get some values for OL conditions and go from there. I still need a TAD bit of work on the idle. I dies and hunts at time adn also wants to surge below 150 rpm. Should be soon when I can punish the car and my 10 bolt at the track