PCM Diagnostics & Tuning HP Tuners | Holley | Diablo

CKP relearn with my Tech 2, issues!!

Thread Tools
 
Search this Thread
 
Old 09-09-2014 | 09:03 PM
  #1  
cgormanZ28's Avatar
Thread Starter
Staging Lane
 
Joined: Sep 2013
Posts: 93
Likes: 1
From: Destin, Florida
Question CKP relearn with my Tech 2, issues!!

Hey guys I just replaced my PCM with a new one and I have
never done a CKP relearn on a GM vehicle before. I do have a Tech
2, I am following the procedures as they are laid out, but I cannot get my
car to do a fuel shut off at 4000 RPM. Vehicle is a 2002 Camaro Z28 -5.7L LS1 - Automatic 4 speed. It is telling me to go WOT until a fuel cut off, only problem is my car is not doing a fuel cutoff. It is all stock. Anyone???
Old 09-09-2014 | 10:27 PM
  #2  
cgormanZ28's Avatar
Thread Starter
Staging Lane
 
Joined: Sep 2013
Posts: 93
Likes: 1
From: Destin, Florida
Default

I have the common P1336 DTC code that will not fawk off until I do this relearn and
my car runs like ****. Any info I will be appreciate. I have been searching everywhere
for an answer and nothing. Thanks.
Old 09-09-2014 | 11:56 PM
  #3  
01WS6/tamu's Avatar
TECH Veteran
20 Year Member
iTrader: (37)
 
Joined: Oct 2004
Posts: 4,937
Likes: 31
From: somewhere in TX
Default

Doing crank relearn has 0 effect on the car running correctly. If it's running bad you need to get to the bottom of that problem first.



Quick Reply: CKP relearn with my Tech 2, issues!!



All times are GMT -5. The time now is 01:57 PM.