knock under load
#1
Teching In
Thread Starter
Join Date: Oct 2003
Location: Las Cruces, NM
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
![Smile](https://ls1tech.com/forums/images/icons/icon7.gif)
Well I finally woke up and purchased the enhanced atap. Ltrims are slightly negative and zero out at WOT. My problem is I get knock if I punch it at a low RPM, say 1500 in 3rd, like 5.5degrees. Also I get knock at about 4500 rpm at WOT, but not as severe, usually 2-3 degrees. I am just looking for a few pointers to get me rolling in the right direction.
![Burnout](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_burnout.gif)
#4
Teching In
Thread Starter
Join Date: Oct 2003
Location: Las Cruces, NM
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Lid, catch can, long tubes, dual exhaust w/ xpipe, 4.10's, I had milled my heads .30 after hydrolocking the motor a couple years ago (long story), vacuum ref.fuel pressure regulator, 38lb injectors and a fuel pump, EDIT. I use to have a turbo. (even longer story)
Jeremy
Jeremy