Is 14,000 RPM possible with stock ECM?
#1
TECH Regular
Thread Starter
iTrader: (5)
Join Date: Feb 2010
Location: Celina, Texas
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
Is 14,000 RPM possible with stock ECM?
Will it control it? I know about the reluctor wheel and sensors etc...But is the programming capable?
We are building a rock crawler with a turbo Busa motor, we have the stock Busa ecm, but you have to run a piggy back to tune it and its expensive, I have an extra 0411 ECM and harness, and HP tuners.
Is the 58 tooth better or 24 tooth ok?
Just a question to throw out there.......
We are building a rock crawler with a turbo Busa motor, we have the stock Busa ecm, but you have to run a piggy back to tune it and its expensive, I have an extra 0411 ECM and harness, and HP tuners.
Is the 58 tooth better or 24 tooth ok?
Just a question to throw out there.......
#3
busa ecu has been hacked six ways to sunday.
http://www.woolichracing.com/tuned/
http://boostbysmith.com/
http://ecuhacking.activeboard.com/f3...300r-hayabusa/
http://www.woolichracing.com/tuned/
http://boostbysmith.com/
http://ecuhacking.activeboard.com/f3...300r-hayabusa/