PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

TCC lockup when cold, not when hot

Thread Tools
 
Search this Thread
 
Old 03-01-2016, 11:51 PM
  #1  
Teching In
Thread Starter
 
jarjarlol's Avatar
 
Join Date: Aug 2013
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default TCC lockup when cold, not when hot

I get lockup if I drive before the car is warmed up all the way, but once it's warm it won't lock. I can command it with VCM scanner special functions but thats it. Trans didn't run over 150 degrees during the test runs. I'm wondering if there's something in the tune I messed up (posted below).
Attached Files
File Type: hpt
turbo idle fix.hpt (317.4 KB, 53 views)
Old 03-02-2016, 12:47 PM
  #2  
TECH Senior Member
iTrader: (25)
 
2xLS1's Avatar
 
Join Date: Nov 2001
Location: Warr Acres, OK
Posts: 5,649
Likes: 0
Received 8 Likes on 8 Posts

Default

I haven't upgraded to 3.0 so I can't look at the tune but I would log misfires. If enough are detected even if false will keep the converter unlocked. Misfire detection is also coolant temp controlled so it doesn't start until warmed up.
Old 03-02-2016, 04:04 PM
  #3  
TECH Apprentice
 
Drj8787's Avatar
 
Join Date: May 2010
Posts: 361
Likes: 0
Received 0 Likes on 0 Posts
Default

my.... in and out of lock up on the hwy problems were solved with the misfire table fix I just followed the instructions in the write up that is a sticky.
Old 03-05-2016, 06:12 PM
  #4  
TECH Senior Member
 
joecar's Avatar
 
Join Date: Apr 2002
Location: So.Cal.
Posts: 6,077
Likes: 0
Received 11 Likes on 9 Posts

Default TCC lockup when cold, not when hot

Check for misfires as 2xLS1 said.

Also, there are some state pids you can log that show reason flags for TCC unlock.

Also, ABS has the ability to report "rough road" to the PCM which causes TCC unlock, this would show up in the state pids.



Quick Reply: TCC lockup when cold, not when hot



All times are GMT -5. The time now is 08:39 AM.