LQ3 tuning
Thread Starter
Registered User
Joined: May 2016
Posts: 1
Likes: 0
LQ3 tuning Hi all, I am in need of a HPtuners bin file or basic settings to get my fresh engine going. We have been trying to tune it the last week but the idle is just messed, seems to idle fine for about a second then just stumbles down to 4-500rpm, sometimes dies getting off the gas.
Basic build is as follows.
LQ4 block
LS3 rods/pistons
LS3 intake/injectors
L92 heads
Gm hotcam
Edelbrock 90mm TB
It ran quite well before the build, had the Vats and everything deleted already, just seems like some setting at idle are conflicting. Was hoping someone would have a similar build I could compare too.
Thanks
Basic build is as follows.
LQ4 block
LS3 rods/pistons
LS3 intake/injectors
L92 heads
Gm hotcam
Edelbrock 90mm TB
It ran quite well before the build, had the Vats and everything deleted already, just seems like some setting at idle are conflicting. Was hoping someone would have a similar build I could compare too.
Thanks
