man and ve reading
Thread Starter
Teching In
Joined: May 2016
Posts: 10
Likes: 0
man and ve reading hi. I changed the camshaft today and i need a new calibration.
According to the tuning school i made 2 new chart one for the maf and one for the ve.
the problem i have in the maf is that the chart show just the reading for 0.0 no matter how hard i change
for the ve the story is different, in fact it show me numbers in the chart but are like 20 35 40 etc. it seems to high to me but i could be wrong.
of course i disabled the maf when i had to deal with the ve and vice versa.
so what's wrong in my table?
According to the tuning school i made 2 new chart one for the maf and one for the ve.
the problem i have in the maf is that the chart show just the reading for 0.0 no matter how hard i change
for the ve the story is different, in fact it show me numbers in the chart but are like 20 35 40 etc. it seems to high to me but i could be wrong.
of course i disabled the maf when i had to deal with the ve and vice versa.
so what's wrong in my table?
There is simply no way anybody can help you with the limited amount of information you just posted. If you have the training from the tuning school, then study it and continue to tune the car. If you still have a specific question, then post your tune and a data log and ask that specific question.
I can only assume that you are using HPT version 3.0?
You have to add the channels that you want to scan. Then go to your graphs and select the proper channels that you want for your data and for your x and y axis. If you aren't scanning those channels then they won't show correctly on the graphs.
You have to add the channels that you want to scan. Then go to your graphs and select the proper channels that you want for your data and for your x and y axis. If you aren't scanning those channels then they won't show correctly on the graphs.
