Fishmasterdan

So I am running a cammed lm7. 233/239 .600 tsp cam. In an s10. Runs great n/a and 1 pass with a 150 shot. Evey pass after that it dies after the burn out and runs pig rich thru the 60‘. First run on nitrous it will run a 1.5 60 foot than 1.65 after the 1st pass. I noticed the learn table changes a lot from the first run to the second run.
What am I doing wrong with the tune? Any thoughts are appreciated.

rpturbo

iTrader: (47)

How did you configure the fuel for the N2o? Is it in the controller or is it a wet system? Maybe post a copy of the tune as is if you can post a Holley Tune here.

Fishmasterdan

Cant upload file to LS1tech. Not sure if this link works or not
https://drive.google.com/file/d/0B3A...ew?usp=sharing

Fishmasterdan

and a link to the fat log.
https://drive.google.com/file/d/0B3A...ew?usp=sharing