Cel p0107
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
99 Corvette, i replaced the spark plugs,wires and the pcv valve today. Now im getting the code P0107 and P0107pd – Manifold absolute pressure (MAP) sensor/barometric pressure (BARO) sensor -low input.
I didn't disconnect any sensors and everything is connected. I did accidentally pop of a hard vaccum hose that connects into the evap service port but it was re connected i cant figure this out any ideas?
this is the line that got disconnected
![Cel p0107-img_1774.jpg](https://ls1tech.com/forums/attachments/pcm-diagnostics-tuning/553519d1476066295t-cel-p0107-img_1774.jpg)
I didn't disconnect any sensors and everything is connected. I did accidentally pop of a hard vaccum hose that connects into the evap service port but it was re connected i cant figure this out any ideas?
this is the line that got disconnected
![Cel p0107-img_1774.jpg](https://ls1tech.com/forums/attachments/pcm-diagnostics-tuning/553519d1476066295t-cel-p0107-img_1774.jpg)
Last edited by MStelle; 10-09-2016 at 09:59 PM.