OBD2 - Oil pressure
Thread Starter
Teching In
Joined: Apr 2017
Posts: 5
Likes: 0
OBD2 - Oil pressure Doing a 2015 LSA swap in a g-body. I’m attempting to setup Bluetooth gauges to an Apple device. Can’t find an oil pressure reading. I’ve read on some post on here the 2015 Camaro Ecm doesn’t read oil pressure. The oil pressure reading goes to BCM and then directly to guage. Anyway to repin so ECM will read or show oil pressure to the OBD port?
Last edited by 21jeremy; Dec 6, 2017 at 04:25 PM.
no. the newer stuff is all canbus instead of the older serial data 2. To get oil pressure and coolant temp u will need aftermarket gauges.
But there are places like lingenfelter and digital Dakota that sell interface boxes to convert the canbus data to regular serial output for stock gauges etc.
Also speed hut gauges sells a nice gauge setup that plugs directly into the OBD2 for readings. Check them out.
But there are places like lingenfelter and digital Dakota that sell interface boxes to convert the canbus data to regular serial output for stock gauges etc.
Also speed hut gauges sells a nice gauge setup that plugs directly into the OBD2 for readings. Check them out.
