PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

New build fires but won’t stay running?

Thread Tools
 
Search this Thread
 
Old 05-28-2024, 08:11 PM
  #1  
L33
On The Tree
Thread Starter
 
L33's Avatar
 
Join Date: Jan 2018
Posts: 108
Received 1 Like on 1 Post
Default New build fires but won’t stay running?

Hey y’all. I have a l33 I just built. Full bottom, full forged, trickflow heads, ls6 intake id1050 injectors, hellcat pump with aeromotive fpr, d1x procharger.



Truck will fire real quick and happy but instantly dies, no throttle response, no attempt to idle.



Pretty sure I scaled injector data and everything correctly, just not sure where to start looking. Seem like the tune?

Sorry, tiktok was fastest and most compressed to upload video:

https://www.tiktok.com/@guhman20022/video/7374220158262431019?_t=8mk0xdFKYd0&_r=1
Old 05-28-2024, 08:13 PM
  #2  
TECH Senior Member
 
G Atsma's Avatar
 
Join Date: Jun 2016
Location: Central Cal.
Posts: 21,444
Received 3,241 Likes on 2,525 Posts
Default

Is VATS kicking in?
Old 05-28-2024, 08:21 PM
  #3  
L33
On The Tree
Thread Starter
 
L33's Avatar
 
Join Date: Jan 2018
Posts: 108
Received 1 Like on 1 Post
Default

Originally Posted by G Atsma
Is VATS kicking in?
it is disabled
Old 05-29-2024, 08:05 AM
  #4  
On The Tree
 
pcguy's Avatar
 
Join Date: Nov 2015
Posts: 123
Received 15 Likes on 15 Posts
Default

What's the fuel pressure when it fires and then when it dies? Also, any codes and does your code reader go off-line when it dies which would indicate a wiring problem?

Nick

Last edited by pcguy; 05-29-2024 at 08:08 AM. Reason: Added a response question
Old 05-29-2024, 08:53 AM
  #5  
L33
On The Tree
Thread Starter
 
L33's Avatar
 
Join Date: Jan 2018
Posts: 108
Received 1 Like on 1 Post
Default

Originally Posted by pcguy
What's the fuel pressure when it fires and then when it dies? Also, any codes and does your code reader go off-line when it dies which would indicate a wiring problem?

Nick
I set pressure at 65 and it pretty much stays there while cranking and firing (in the video), maybe drops to 63. I tried an A1000 straight lined at 70psi just to rule out pump, wiring, etc and had no change.

I’ll be home late tonight but either tonight I’ll get scanner on it and check those things. Thank You
Old 05-30-2024, 09:16 AM
  #6  
TECH Senior Member
iTrader: (39)
 
LilJayV10's Avatar
 
Join Date: Apr 2007
Location: Evansville,IN
Posts: 9,491
Received 913 Likes on 653 Posts
LS1Tech 10 Year
Default

The tune and a log would be kinda helpful....
The following users liked this post:
Old Buzzard (05-30-2024)
Old 05-30-2024, 08:18 PM
  #7  
Moderator
 
mrvedit's Avatar
 
Join Date: Aug 2010
Location: Ann Arbor, MI
Posts: 7,120
Received 426 Likes on 325 Posts

Default

It sounds exactly like VATS kicked in. Seen cases where you think its disabled and it snot.
The following 2 users liked this post by mrvedit:
G Atsma (05-31-2024), Old Buzzard (06-03-2024)
Old 06-10-2024, 08:57 PM
  #8  
TECH Veteran
iTrader: (37)
 
01WS6/tamu's Avatar
 
Join Date: Oct 2004
Location: somewhere in TX
Posts: 4,932
Likes: 0
Received 29 Likes on 21 Posts
LS1Tech 10 Year
Default

You need to uncheck all the theft deterrent related codes and uncheck in vats section for it to be fully disabled.
Old 06-10-2024, 10:48 PM
  #9  
TECH Senior Member
iTrader: (39)
 
LilJayV10's Avatar
 
Join Date: Apr 2007
Location: Evansville,IN
Posts: 9,491
Received 913 Likes on 653 Posts
LS1Tech 10 Year
Default

Also do a write entire when you delete VATS.

I know some people say you don't need to though.



Quick Reply: New build fires but won’t stay running?



All times are GMT -5. The time now is 11:34 AM.