2010 camaro theft recovery build
#1
2010 camaro theft recovery build
first off if this is in the wrong spot let me know.
bought a 2010 camaro ss theft recovery. had no engine, trans, or engine wiring harness and computer. installed a 2010 ls3 engine, a 6l80 trans from a 2009 pontiac g6. [tcm is being sent off to be program to the 2010 operating system]. bought a 2010 camaro engine harness from lkq and also a ecm.
problem is when i try to turn the engine over by the ignition switch all the dash lights go out and nothing happens, until i release the switch then all the lights come back on and gauges sweep once. have hp tuners and have wasted 4 credits trying to unlock the ecm to see if i need to turn off vats or maybe clutch pedal interlock. i can read the ecm it just want let me write to it. anyone got any ideas on the problem.
bought a 2010 camaro ss theft recovery. had no engine, trans, or engine wiring harness and computer. installed a 2010 ls3 engine, a 6l80 trans from a 2009 pontiac g6. [tcm is being sent off to be program to the 2010 operating system]. bought a 2010 camaro engine harness from lkq and also a ecm.
problem is when i try to turn the engine over by the ignition switch all the dash lights go out and nothing happens, until i release the switch then all the lights come back on and gauges sweep once. have hp tuners and have wasted 4 credits trying to unlock the ecm to see if i need to turn off vats or maybe clutch pedal interlock. i can read the ecm it just want let me write to it. anyone got any ideas on the problem.