TPS and MAF help asap please
Thread Starter
On The Tree
Joined: Jun 2008
Posts: 123
Likes: 0
From: Suburb of Detroit
TPS and MAF help asap please Not sure where to post this, so please move if needed. Here’s my issue, I’m using a 2004 Silverado truck harness, I had it modified for my swap application into my impala. What they didn’t do, was wire me in IAC connector and TPS connectors to use 2000 Camaro TPS and IAC valve. I need to wire these in, can anyone help me with how to wire them in? I’m think the TPS Camaro 3 wire can be wired in to the truck TPS but the truck one has 5 wires, and where does the IAC connector get wired in at? Does it go in place of the MAF connector from the truck harness? Please help. Thanks
The Silverado used a drive by wire, so it did not have the IAC or TPS. You didn't say what ecm your using, but the ECM must have a iac and TPS driver if you want to use those.
The IAC and TPS have nothing to do with the MAF. A truck harness, does stick the IAT in WITH the MAF, so if you do not want a MAF, you do need to split the IAT out because you will need that.
The IAC and TPS have nothing to do with the MAF. A truck harness, does stick the IAT in WITH the MAF, so if you do not want a MAF, you do need to split the IAT out because you will need that.
Last edited by rpturbo; Feb 25, 2022 at 07:26 PM.
