Not start after cam
Thread Starter
Teching In
Joined: Dec 2024
Posts: 32
Likes: 0
From: Pa
Not start after cam I was able to start it and have it run with the throttle 1/4 open and then it died and it won’t start back up. It was running really rich so I decided to put in my tune which I decreased VE idle by 15% and increased my idle to 950 I let the car sit overnight and tried to start it again, but it will not start. I’m really stuck in any help would be very helpful.
cam is a torquer V2
cam is a torquer V2
Staging Lane
Joined: Apr 2023
Posts: 91
Likes: 15
have you checked wiring? I was a dumb dumb who pinched my cam sensor harness with the intake on re install and it gave me all kinds of issues. id check into that. my car would run but it would do a bunch of random stuff like die surge kill battery ect. took me weeks of trial and error new ecu crank sensor etc. all along was a pinched harness
Thread Starter
Teching In
Joined: Dec 2024
Posts: 32
Likes: 0
From: Pa
yeah, I’m in Collegeville yeah everything lights up. It started last night with the throttle a little more than 1/4. Open battery is not drained. I’m putting a battery charger on it when I get home. but it won’t start right now.
Trending Topics
Thread Starter
Teching In
Joined: Dec 2024
Posts: 32
Likes: 0
From: Pa
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Why do the IAT and ECT both show -38 degrees?
Why does the MAP not change while cranking?
Why does the MAP not change while cranking?
Last edited by mrvedit; Feb 6, 2025 at 08:05 PM. Reason: Remove non-informational portion
Moderator
Joined: Aug 2010
Posts: 7,323
Likes: 529
From: Ann Arbor, MI
It currently shows your sensors are all disconnected. Cut harness? Really bad grounds? PCM partly disconnected?
Once you have reasonable values for ECT and IAT showing in your scanner, you should be closer to a start.
I apologize that two long-time, very experienced and generally very helpful members decided to have a "personal" conversation on your thread.
Once you have reasonable values for ECT and IAT showing in your scanner, you should be closer to a start.
I apologize that two long-time, very experienced and generally very helpful members decided to have a "personal" conversation on your thread.
