LS1/LS6 MAF's
Thread Starter
Teching In
Joined: Jan 2005
Posts: 1
Likes: 0
LS1/LS6 MAF's Does anyone know if the connections for the MAF sensor are the same between LS1 F-body and LS6 Corvette I have seen a couple of 85MM aftermarket but I have not herd of anyone installing an LS6 MAF into an 2002 F-body I understand that calibration would be required with ls1 edit or some similar program.
No, the connections are 3-wire on the F-body and
5-wire on the 85mm Delphi MAFs (trucks, 'vettes,
many other cars now). A fair while back I posted the
pinout info. Pace and Casper's are places to get an
adapter harness (Pace resells Casper's product). You
could also get the last foot or so of the MAF harness
off a junkyard '99-up truck, and solder it up if you
like that kind of thing.
5-wire on the 85mm Delphi MAFs (trucks, 'vettes,
many other cars now). A fair while back I posted the
pinout info. Pace and Casper's are places to get an
adapter harness (Pace resells Casper's product). You
could also get the last foot or so of the MAF harness
off a junkyard '99-up truck, and solder it up if you
like that kind of thing.
