KR ? with the predator
#4
Moderator
iTrader: (11)
Join Date: Mar 2002
Location: East Central Florida
Posts: 12,604
Likes: 0
Received 6 Likes
on
6 Posts
The problem is, the Predator adjusts spark and PE
but has no ability to address airflow calibrations. If
you (say) are a bit lean on the speed density side or
you could stand to have the PE MAP threshold a little
bit lower, so sorry, too bad.
It also wants to adjust spark by a single scaling, while
you might be able to stand more WOT spark but not
so much in the lower RPM, mid-MAP range, or whatever.
One size fits all. As long as you like a muu-muu type fit.
You can have things tuned well for steady state based
on MAF, PE and dialed-in spark but still have annoying
things go on during transient operation. I know this.
It's one of the things that made me give up on the
Predator and get the more broadly capable tool.
but has no ability to address airflow calibrations. If
you (say) are a bit lean on the speed density side or
you could stand to have the PE MAP threshold a little
bit lower, so sorry, too bad.
It also wants to adjust spark by a single scaling, while
you might be able to stand more WOT spark but not
so much in the lower RPM, mid-MAP range, or whatever.
One size fits all. As long as you like a muu-muu type fit.
You can have things tuned well for steady state based
on MAF, PE and dialed-in spark but still have annoying
things go on during transient operation. I know this.
It's one of the things that made me give up on the
Predator and get the more broadly capable tool.