PCM Diagnostics & Tuning HP Tuners | Holley | Diablo

Swapping PCM's?

Thread Tools
 
Search this Thread
 
Old 06-01-2005 | 09:39 AM
  #1  
99Hawk262's Avatar
Thread Starter
11 Second Club

iTrader: (19)
 
Joined: Jan 2005
Posts: 2,491
Likes: 1
From: Little Rock
Default Swapping PCM's?

My buddy is getting a 2002 Z28 M6. He wants an automatic, and I of course want a manual.......so we are talking about swapping our trannies. Is this going to be a nightmare? Can we just swap PCM's. My car is a '99. I was told you could swap PCM's out of '99-'02, but I am skeptical of this. If we can't swap PCM's, how will his car react to getting an automatic when it was factory equipped with the 6-speed? Any input and ideas would be great.
Old 06-01-2005 | 05:23 PM
  #2  
99Hawk262's Avatar
Thread Starter
11 Second Club

iTrader: (19)
 
Joined: Jan 2005
Posts: 2,491
Likes: 1
From: Little Rock
Default

Anyone........?
Old 06-01-2005 | 05:25 PM
  #3  
slow's Avatar
TECH Senior Member
iTrader: (7)
 
Joined: Dec 2001
Posts: 6,150
Likes: 1
From: Orlando
Default

since the 99 and 2002 cars are not the same in calibration, you will need to compensate for injector differences in a tune.

It would be easier for you 2 to have the pcm's reflashed with a M6 / A4 pcm of the same year of the vehicle. Unless you purchase a copy of hptuners and use that for the swap, since they offer 2 years.

Ryan
Old 06-01-2005 | 11:34 PM
  #4  
99Hawk262's Avatar
Thread Starter
11 Second Club

iTrader: (19)
 
Joined: Jan 2005
Posts: 2,491
Likes: 1
From: Little Rock
Default

How do you go about reflashing the PCM's? Who can do this?
Old 06-02-2005 | 09:14 AM
  #5  
wrencher's Avatar
wrencher
iTrader: (2)
 
Joined: Aug 2002
Posts: 4,762
Likes: 1
From: Chicagoland
Default

I dont know if you might have a VATS(vehicle anti-theft system) issue also, prolly have to relearn it also.
Tuning it would be the best option, alot of sponsors here do that. Or you can get a HP tuner set up for your needed years 99/02?
Old 06-02-2005 | 09:20 AM
  #6  
slow's Avatar
TECH Senior Member
iTrader: (7)
 
Joined: Dec 2001
Posts: 6,150
Likes: 1
From: Orlando
Default

vats is not PCM based on the f platform, is it just a simple 5volt 50hz square wave into the pcm. The BCM does the decoding of the key, and provides the enable signal.



Ryan




All times are GMT -5. The time now is 02:40 AM.