DynotuneN2O

iTrader: (13)

Let me look into that error code for the LM-1

www.dynotunenitrous.com

Dan

DynotuneN2O

iTrader: (13)

Ive looked at this and check these things.
1) check the din cable for damage, burnt, cut etc.
2) Check the din cable connector, look at pins on the LM-1 and on the cable side
3) My guess is that the o2 sensor is bad, if its been dropped at all it can damage the sensor. If you have it mounted in your car, have you had any welding done lately?

Dan

WicketMike

iTrader: (13)

i think its the sensor also, because when i left it at a shop to do work. I told them that they needed to turn on the LM1 to warm it up first. When i picked it up it wasnt working. So im guessing they ran the car without turning it on.

I didnt want to spend $80 on a new one and find out that the sensor wasnt the problem though. I emailed Cort Charles about it a few times and he never responded.

thanks for your help Dan.

Mike

WicketMike

iTrader: (13)

do you sell the sensor?

TAQuickness

iTrader: (28)

I'm a cheap date - and Ice cold Miller Lite would be just fine in my book.

DynotuneN2O

iTrader: (13)

http://www.dynotunenitrous.com/store...?idproduct=162

Just mention LS1 Tech and your LS1 Tech name on the order and your price will be adjusted down 15% when your order is porcessed.

Thanks,
Dean
www.DynoTuneNitrous.com

S2002S

Thanks again for the help. Now to start tuning!