logging AFR with HPT
Thread Starter
TECH Fanatic
iTrader: (9)
Joined: Nov 2004
Posts: 1,376
Likes: 0
From: Bucks County, PA
logging AFR with HPT I have the LC-1 wideband setp. For some reason I can't logg my AFR with my HPT. When I go into scanner the narrow-band is the only thing highlight and it won't let me click on wideband. Is there something I need to do?
TECH Senior Member
Joined: Nov 2001
Posts: 7,036
Likes: 1
From: Lake Zurich, IL
you need to use the correct cells... the wideband pid is added at the bottom below the standard PIDs
in the help file under VCM Scanner -> Scan -> EIO it shows which spots to use for each input and output
in the help file under VCM Scanner -> Scan -> EIO it shows which spots to use for each input and output
Thread Starter
TECH Fanatic
iTrader: (9)
Joined: Nov 2004
Posts: 1,376
Likes: 0
From: Bucks County, PA
OK I read about how you have to setup the wideband in one of the 4 inputs of the HPT but I don't see where you have to do it at.
I know how to get to the LC-1's 2 inputs, would I have to set that up to?
I know how to get to the LC-1's 2 inputs, would I have to set that up to?
