Programming when changing injectors.
Programming when changing injectors. I currently have stock 26lb injectors in my car and my friend gave me his 28 lbers. I was told there was some changes I need to make with my HPTuner. Any info on this.
thanks.
thanks.
TECH Senior Member
Joined: Nov 2001
Posts: 7,036
Likes: 1
From: Lake Zurich, IL
edit->Engine->Fuel Control
Download a 2002 or 2001 stock F-Body .bin from my repository... then copy the Offset vs Volts vs KPA and Flow Rate vs KPA tables from the 01/02 file to your 00 file
Download a 2002 or 2001 stock F-Body .bin from my repository... then copy the Offset vs Volts vs KPA and Flow Rate vs KPA tables from the 01/02 file to your 00 file
TECH Senior Member
Joined: Nov 2001
Posts: 7,036
Likes: 1
From: Lake Zurich, IL
The 26-28 just puts you further away from maxing your injectors and gives you a *little* more fuel to work with safely
If they're free then I say go for it... but if you're going to pay for injectors... 26lb-28lb isn't that much and if you add anymore mods you'll be maxing them out soon enough too....
If they're free then I say go for it... but if you're going to pay for injectors... 26lb-28lb isn't that much and if you add anymore mods you'll be maxing them out soon enough too....
