Diabling SES / Sevice Engine Light
#1
Thread Starter
TECH Apprentice
iTrader: (1)
Joined: Oct 2003
Posts: 328
Likes: 0
From: San Diego, CA
Diabling SES / Sevice Engine Light
Ok, so I'm tuning my VE table with the MAF disconnected. I want to disable the SES light for the MAF. In HP Tuners which setting do you switch? Disable SES, or no MIL light, or both? Also, I know you don't want to, but which one disables the code entirely? (no error reported?) Thanks!