98TA_vert

I'm going to do a install TR224 114 lsa/ls6 intake/pacesetter LT w/ory and the closest place for me to get a tune is a 1.5 hr city/hwy drive away at rapid ms.

IF it wasn't a damn 98 i'd gett a crane cam w/ the crane tuner

Now the question. can i drive that far w/o a tune and not do any damage or should i invest in a hp tuner or something similar and possibly put myself in another predicament ? im not a computer illitterit idiot, I mean everybody's gotta start somewhere, right?

Ragtop 99

iTrader: (7)

I like having the software, but Mikey does an excellent job so he is worth the drive. No, you won't damage anything on the drive over.

SSpdDmon

iTrader: (10)

It may take an hour or two for your car to adjust to that cam. But, it should hold up fine given it's on a 114lsa and you're driving an M6. It'll run...just not as good as if it were tuned.

foff667

iTrader: (2)

you should be fine...it'll probably be a little lopey and ya might stall a couple of times depending on how close the grind is to the specs but you should be fine for the most part

mrr23

iTrader: (3)

you know vinci/crane does have tuners for the 97-98 now. if that's what was holding you back, was them not having one, it's out now.