Is OLFA table used for any normal operating conditions ?
11-11-2005 | 01:41 AM
#21
Open Loop Fuel Air...
Open Loop F/A vs. Coolant Temp vs. MAP: This table is used to determine the commanded AFR when in open loop mode. It divides the Stoich AFR value. AFR is determined by 14.7/table value. Example: 14.7/1.30 = 11.3 AFR
Open Loop F/A vs. Coolant Temp vs. MAP: This table is used to determine the commanded AFR when in open loop mode. It divides the Stoich AFR value. AFR is determined by 14.7/table value. Example: 14.7/1.30 = 11.3 AFR
