RED and BLUE PCM connectors
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Nov 2005
Location: S.E. Tx
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
RED and BLUE PCM connectors
I need theRED and BLUE PCM connectors
Other than junkyards where can you get these new? I thought i had a good source and no one (JYs) want to part with them by themselves!
Other than junkyards where can you get these new? I thought i had a good source and no one (JYs) want to part with them by themselves!
Last edited by txoutlaw; 11-19-2005 at 10:18 PM.
#3
FormerVendor
Join Date: Aug 2005
Location: Decatur IN.
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
#5
Female Terminals used in Red/Blue connectors
If anyone needs new terminals for their connectors you can get the original Delphi parts from Mouser Electronics. Part number: 829-12084912
http://www.mouser.com/search/Product...mBK4WgOQ%3D%3D
If you order 100 they are only $.22 each. Not a bad deal but it took me several hours to track them down. I have verified they work in both the blue and red connectors.
Roger
http://www.mouser.com/search/Product...mBK4WgOQ%3D%3D
If you order 100 they are only $.22 each. Not a bad deal but it took me several hours to track them down. I have verified they work in both the blue and red connectors.
Roger
#6
TECH Regular
Join Date: Aug 2004
Location: Tyler, TX.
Posts: 443
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
TECH Veteran
iTrader: (19)
I don't know what it is! Maybe for a transmission computer or more modern, compact form factor???? It isn't Camaro LS1 though
Last edited by 2002_Z28_Six_Speed; 01-18-2008 at 08:25 PM.
#9
TECH Senior Member
iTrader: (7)
can you put it next to a ruler, that looks correct, it is just the blue retainer (which you need 2 of) , but you still need the larger metal piece as well.
I've ordered about 10 from them, and they've worked fine on the harnesses i've made, maybe they sent the wrong one, if my statement above isn't the case.
Ryan
I've ordered about 10 from them, and they've worked fine on the harnesses i've made, maybe they sent the wrong one, if my statement above isn't the case.
Ryan
#10
TECH Veteran
iTrader: (19)
can you put it next to a ruler, that looks correct, it is just the blue retainer (which you need 2 of) , but you still need the larger metal piece as well.
I've ordered about 10 from them, and they've worked fine on the harnesses i've made, maybe they sent the wrong one, if my statement above isn't the case.
Ryan
I've ordered about 10 from them, and they've worked fine on the harnesses i've made, maybe they sent the wrong one, if my statement above isn't the case.
Ryan
#12
On The Tree
iTrader: (18)
Join Date: Jan 2006
Location: Oak Forest, Illinois
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
You don't necessarily need the correct color for them to work. The different colors denote its indexing tab. Different colors have their indexing tabs in different spots. You can trim off the incorrect color connectors indexing tabs and then put a dab of paint on the connector to denote its color/position to the PCM. I have found a lot of Red and Green connectors from Buicks for some reason at the U-Pull junkyard.
Jeff
Jeff
5742675554, 82912084912, blue, connector, connectors, delphi, ecu, identification, ls1, pcm, price, red, redblue, retainer, year