Atap help needed, IAC Pos vs. counts.
01-01-2002 | 12:46 AM
#2
Thread Starter
UNDER PRESSURE MOD
iTrader: (19)
Joined: Nov 2001
Posts: 10,813
Likes: 13
From: Doylestown PA
Atap help needed, IAC Pos vs. counts. Im trying to monitor my IAC counts but all I can find is the motor pintle position which is telling me bewteen 0 and 4 which can't be the counts. I have just gotten the counts measured a few weeks prior on someone else's atap and the 'counts' were reading 32-36.
Please help. Did I receive an older version (ver 2.10) If this is the correct version, where do I need to look to find the IAC counts.
Please help. Did I receive an older version (ver 2.10) If this is the correct version, where do I need to look to find the IAC counts.
01-01-2002 | 06:01 PM
#3
Thread Starter
UNDER PRESSURE MOD
iTrader: (19)
Joined: Nov 2001
Posts: 10,813
Likes: 13
From: Doylestown PA
Re: Atap help needed, IAC Pos vs. counts. Come on people, someone knows the answer.
I've looked through the menus at least a dozen times and I can't find IAC counts.
Thanks.
I've looked through the menus at least a dozen times and I can't find IAC counts.
Thanks.
01-02-2002 | 08:47 AM
#5
Thread Starter
UNDER PRESSURE MOD
iTrader: (19)
Joined: Nov 2001
Posts: 10,813
Likes: 13
From: Doylestown PA
Re: Atap help needed, IAC Pos vs. counts. Yes this is a head and cam car, but it is more of a question of my version of ATAP. I know for a fact, the week prior to me getting my ATAP a buddy checked the car and the IAC counts were in the low 30 range which is where they are supposed to be. I would just like to be able to check them myself now that I have atap, that's all.
01-02-2002 | 10:45 AM
#7
TECH Senior Member
Joined: Nov 2001
Posts: 9,246
Likes: 2
From: Troy, AL
Re: Atap help needed, IAC Pos vs. counts. Was the engine fully warmed?
You can download the latest versions of Autotap from www.autotap.com <img src="gr_stretch.gif" border="0">
You can download the latest versions of Autotap from www.autotap.com <img src="gr_stretch.gif" border="0">
Trending Topics
01-02-2002 | 10:54 AM
#8
Thread Starter
UNDER PRESSURE MOD
iTrader: (19)
Joined: Nov 2001
Posts: 10,813
Likes: 13
From: Doylestown PA
Re: Atap help needed, IAC Pos vs. counts. Alright, let me rephrase the question.
On which menu will I find the IAC motor counts, not the IAC motor pintle position?
I checked and I have the latest version (ver 2.10) could it be that they deleted this item in the latest revision?
I know the motor idles very well, but I just wanted to check to see what the counts were.
Thanks.
On which menu will I find the IAC motor counts, not the IAC motor pintle position?
I checked and I have the latest version (ver 2.10) could it be that they deleted this item in the latest revision?
I know the motor idles very well, but I just wanted to check to see what the counts were.
Thanks.
01-02-2002 | 01:58 PM
#9
Launching!
Joined: Nov 2001
Posts: 227
Likes: 0
From: Valencia, CA
Re: Atap help needed, IAC Pos vs. counts. IAC Pintle Position is the correct parameter. If it is reading 0, then that is what it is. I still use an old version of Atap on one of my computers.
[quote]Originally posted by Pewter_00_TA:
<strong>Alright, let me rephrase the question.
On which menu will I find the IAC motor counts, not the IAC motor pintle position?
I checked and I have the latest version (ver 2.10) could it be that they deleted this item in the latest revision?
I know the motor idles very well, but I just wanted to check to see what the counts were.
Thanks.</strong><hr></blockquote>
[quote]Originally posted by Pewter_00_TA:
<strong>Alright, let me rephrase the question.
On which menu will I find the IAC motor counts, not the IAC motor pintle position?
I checked and I have the latest version (ver 2.10) could it be that they deleted this item in the latest revision?
I know the motor idles very well, but I just wanted to check to see what the counts were.
Thanks.</strong><hr></blockquote>