quick autotap question
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: PA
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
What numbers should I be looking at on my O2B1S1 and O2B2S1 trims to see if i'm rich vs. lean. Also What field under transmission will show me the transmission pressure.
--Sky
--Sky
#2
Launching!
Join Date: Nov 2001
Location: Westminster, CO
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
For the O2's at WOT you want them somewhere around .89 or so. If they are reading higher you are rich and lower lean. I would highly suggest you get the ltft spreadsheet and dos autotap config file.
Can't help with the tranny since I have a manual right now.
Can't help with the tranny since I have a manual right now.
#3
TECH Addict
Join Date: Nov 2001
Location: College Station, Tx
Posts: 2,207
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
As long as yoru stock o2's are between 820-980 or so you are probably fine. It's impossible to just claim a target voltage - and a few mV variation from that voltage can be a large difference. I would tune your car so it feels good in that range, then put it on a dyno with a wideband.