LS1 Edit ?
#1
Launching!
Thread Starter
Join Date: Nov 2001
Location: Marlboro, NY
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I am thinking about getting LS1 Edit but I need to know a few things - Can you fill in the MAF tables for higher airflow readings? I will need to tune for a F/I setup and don't know if I would be better off just getting a custom tune done instead.
Thanks
Thanks
#4
TECH Addict
Join Date: Nov 2001
Location: College Station, Tx
Posts: 2,207
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You will be limited to 512 g/sec I believe - this is the largest value the MAF transfer table can hold because of the byte size and the way it represents the data.
You are also limited to 12000hz sampling input frequency from the MAF.
Once you hit either of those limits you will need to program "around" them. This is what people have been doing for ages on LTx based vehicles. Basically you will add the extra fuel you need through the PE vs RPM table.
Chris
You are also limited to 12000hz sampling input frequency from the MAF.
Once you hit either of those limits you will need to program "around" them. This is what people have been doing for ages on LTx based vehicles. Basically you will add the extra fuel you need through the PE vs RPM table.
Chris