2000 ls1 engine and ecu schematic needed
#1
Launching!
Thread Starter
iTrader: (4)
Join Date: Feb 2002
Location: oregon
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
2000 ls1 engine and ecu schematic needed
Hey guys. I've got a 2000 ls1 from a trans am, with a 6 speed. I really need the wiring diagram for the ecu to engine. Usually there is a page that shows all the ecu pins, what they go to, and what the standard output voltage is for each. I need that as well. I stopped by a dealer, and they said they couldn't help, and that there weren't manuals anymore... they have it all on computer. I know they're just blowing me off... If anyone has this info and could email it to me, I would greatly appreciate it. Thanks,
Bryan
bryhp@attbi.com
Bryan
bryhp@attbi.com
#3
On The Tree
iTrader: (12)
Join Date: Mar 2002
Location: jawja peach land
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2000 ls1 engine and ecu schematic needed
this page doesn't have the voltages, but is a pretty good schematic.....hope it helps.....
http://www.ls1.com/00pinpcm.htm
http://www.ls1.com/00pinpcm.htm
#4
Launching!
Thread Starter
iTrader: (4)
Join Date: Feb 2002
Location: oregon
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2000 ls1 engine and ecu schematic needed
Thanks burbanman,
I just ran across that yesterday. It gets me about halfway there. I haven't had any other luck finding the voltage info, or schamatics. I guess I'll have to spring for the entire $120 shop manual....
I just ran across that yesterday. It gets me about halfway there. I haven't had any other luck finding the voltage info, or schamatics. I guess I'll have to spring for the entire $120 shop manual....
#5
Launching!
Thread Starter
iTrader: (4)
Join Date: Feb 2002
Location: oregon
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2000 ls1 engine and ecu schematic needed
Giving myself one last chance.... Even if someone knows where I can buy the wiring diagrams without the rest of the shop manual set, I'd appreciate it. Thanks.
#6
TECH Addict
Join Date: Nov 2001
Location: Live Oak, FL - in the woods where the creatures lurk.
Posts: 2,003
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2000 ls1 engine and ecu schematic needed
I don't believe I've ever seen a page in my Helms that shows voltages at pcm pinouts. Even the different schematics don't show that. Sometimes it shows desired voltages under the engine codes section for different DTCs. Most sensors seem to operate 0-5V though.