Figured out what was wrong...
#1
12 Second Club
Thread Starter
iTrader: (13)
Join Date: Nov 2001
Location: San Diego, CA
Posts: 1,898
Likes: 0
Received 0 Likes
on
0 Posts
Figured out what was wrong...
I figured out why my tuning was off when I plugged all my new tables back in.
Somehow when going back a couple of tunes (when I was having problems) I must have went back to a tune that had the stock OLFA table, PE enabled and fuel trimming enabled - because that was all in the SD tune I was working with. So, logging while fuel trimming and in/out of PE just MIGHT have skewed the wideband results a bit.
I started doing the VE table over again this afternoon.
(sarcasm) Surprisingly the results are a lot more consistent this time ! (/sarcasm).
At least I hope that's what it was. Should be a lot quicker this time around, I've had lots of practice ! :p
Rob (Bad30th)
Somehow when going back a couple of tunes (when I was having problems) I must have went back to a tune that had the stock OLFA table, PE enabled and fuel trimming enabled - because that was all in the SD tune I was working with. So, logging while fuel trimming and in/out of PE just MIGHT have skewed the wideband results a bit.
I started doing the VE table over again this afternoon.
(sarcasm) Surprisingly the results are a lot more consistent this time ! (/sarcasm).
At least I hope that's what it was. Should be a lot quicker this time around, I've had lots of practice ! :p
Rob (Bad30th)