Problem After Dyno Pull
Thread Starter
Teching In
Joined: Jan 2002
Posts: 26
Likes: 0
Problem After Dyno Pull After a dyno pull I did the other day, I received two codes telling me my ABS and ASR were inoperaive.. I remember backing up and clearing them when I originally had the car dynoed but forgot to do so this time..How can I get rid of these or have them operable again?
Thanks, Sawacs
Thanks, Sawacs
TECH Enthusiast
Joined: Nov 2001
Posts: 554
Likes: 0
From: Ontario Calif.
Re: Problem After Dyno Pull If they don't clear by themselves look at the connectors on the rear axle. Sometimes when the car is being straped down they get pulled out or become loose. We had a guy with the codes for a week. He reset the computer and did all kinds of other stuff before he finally got under the car and pluged the connector in.
Thread Starter
Teching In
Joined: Jan 2002
Posts: 26
Likes: 0
Re: Problem After Dyno Pull Hey Poltergeist, thanks! You are de man! <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />
That was the exact problem. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> Sure enough, I took a look under the car and there was a nice little connector dangling down
Thanks again, Sawacs
That was the exact problem. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> Sure enough, I took a look under the car and there was a nice little connector dangling down
Thanks again, Sawacs
