MAFT tuning question
Thread Starter
TECH Apprentice
Joined: Feb 2002
Posts: 363
Likes: 0
From: Brook Park, Ohio
MAFT tuning question Before I go any further with my MAFT tuning I want to make sure that these numbers make sense.
settings LTFT O2
0/0 5 0.955
5/0 0.86 0.942
5/-2 -1.33 0.944
5/-4 0.49 0.936
5/-6 0.185 0.932
note: 5/-2 = base set at -5% and WOT set at -2%
The reason why I'm questioning these numbers is, I expected greater changes in O2 as I adjusted my WOT setting. This is the first time I used Autotap and a MAFT and I want to make sure these numbers seem reasonanble before I continue to lean my car out.
Thanks,
settings LTFT O2
0/0 5 0.955
5/0 0.86 0.942
5/-2 -1.33 0.944
5/-4 0.49 0.936
5/-6 0.185 0.932
note: 5/-2 = base set at -5% and WOT set at -2%
The reason why I'm questioning these numbers is, I expected greater changes in O2 as I adjusted my WOT setting. This is the first time I used Autotap and a MAFT and I want to make sure these numbers seem reasonanble before I continue to lean my car out.
Thanks,
Re: MAFT tuning question Doing it just right. Make sure you get your BASE b/w 0 and -3-5 then you can tune your WOT until you get the most timing without KR. However, do NOT mess with WOT until you get the base situated <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> When you get KR at WOT just turn it a click rich and you'll be good to got <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
