MAF Low Freq.. and O2's Slow response?
05-09-2002, 09:22 AM
#1
On The Tree
Thread Starter
Join Date: Nov 2001
Location: Take a wild guess!!
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
MAF Low Freq.. and O2's Slow response? MAF Low Freq.. and O2's Slow response? I got those DTC's what does that mean? Bad MAF and O2's? I just replaced the O2's last month.. <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
<small>[ May 09, 2002, 10:26 AM: Message edited by: AJH LS1 Z28 ]</small>
<small>[ May 09, 2002, 10:26 AM: Message edited by: AJH LS1 Z28 ]</small>
05-09-2002, 10:59 AM
#2
TECH Addict
Join Date: Nov 2001
Location: College Station, Tx
Posts: 2,207
Likes: 0
Received 0 Likes
on
0 Posts
Re: MAF Low Freq.. and O2's Slow response? What kind of headers do you have - any leaks? With the slip on collector dynatechs even with a good seal it seems that enough air gets through to buffer the gas stream and slow down the amount of swinging of the o2's.
The MAF low frequency is strange though - that's normally a problem. You might check the "Eng Sense" fuse under the hood to make sure it isn't blown. Do you get the code continuously or just once?
Chris
The MAF low frequency is strange though - that's normally a problem. You might check the "Eng Sense" fuse under the hood to make sure it isn't blown. Do you get the code continuously or just once?
Chris
05-09-2002, 01:15 PM
#3
On The Tree
Thread Starter
Join Date: Nov 2001
Location: Take a wild guess!!
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Re: MAF Low Freq.. and O2's Slow response? I have MAC headers.. they are sealed pretty good..
I only get the SES light for the MAF low frequ. every once in a while... just dont know why it happens..
I only get the SES light for the MAF low frequ. every once in a while... just dont know why it happens..
