P0751 code and LS1 Edit problem
Thread Starter
TECH Senior Member
iTrader: (7)
Joined: Nov 2001
Posts: 9,491
Likes: 1
From: Bethesda, MD
Re: P0751 code and LS1 Edit problem not sure, but here are a couple questions.
There are 2 similar codes, 751 and 756. Did he turn-off both? did he disable the test or just the reporting?
Good luck. FWIW, I had MTI programming and it worked fine.
There are 2 similar codes, 751 and 756. Did he turn-off both? did he disable the test or just the reporting?
Good luck. FWIW, I had MTI programming and it worked fine.
Teching In
Joined: Nov 2001
Posts: 43
Likes: 0
From: Kingwood, TX
P0751 code and LS1 Edit problem Jayson at MTI has turned off the P0751 code on my car but somehow that code keeps popping up about once a week. He checked the program and it shows that the code is turned off. Why does it still set an SES light if the programming has turned it off? Has anyone else had this problem.
Teching In
Joined: Nov 2001
Posts: 43
Likes: 0
From: Kingwood, TX
Re: P0751 code and LS1 Edit problem Ragtop
Thanks for the response. I'll check with Jayson to see exactly what was done. I didn't realize that you have to deactivate reporting and running of the test separately.
Thanks for the response. I'll check with Jayson to see exactly what was done. I didn't realize that you have to deactivate reporting and running of the test separately.
