i need your help
i need your help ls1 edit will be here any day now and i would like to have some understanding of what needs to be done when it gets here so i wont be totally clueless. first things first, my car is a 98 so i need to find a file for a stock 98 a4 car right. can someone give me a few hints that might help me out. the things i am most concerned about doing when it gets here are
program for 373 gear
raise shift points to 6600 and 6800 limiter
turn off rear o2 sensors
raise idle for my new cam 224 224 568 568 112
turn off egr
turn off torque managment
and then tune the cars air fuel ratio
my car has headers,orp,asp pulley,cam,ported tb and mass air, lid,vig 3800,nos 125 dry shot and 373 gears. will there be
any horsepower to gain from tuning a stock head car and if so how much do you think. also if there is anything else i can do that i didnt mention that would help please let me know. tia joey
<small>[ June 06, 2002, 03:18 PM: Message edited by: JPJBC ]</small>
program for 373 gear
raise shift points to 6600 and 6800 limiter
turn off rear o2 sensors
raise idle for my new cam 224 224 568 568 112
turn off egr
turn off torque managment
and then tune the cars air fuel ratio
my car has headers,orp,asp pulley,cam,ported tb and mass air, lid,vig 3800,nos 125 dry shot and 373 gears. will there be
any horsepower to gain from tuning a stock head car and if so how much do you think. also if there is anything else i can do that i didnt mention that would help please let me know. tia joey
<small>[ June 06, 2002, 03:18 PM: Message edited by: JPJBC ]</small>
Re: i need your help Most of those items are very easy and straight forward. Just click on the tabs.
Tuning is a different story. You can try to do it using ATAP data, but the best way is to visit a wideband dyno or tune at the track.
Read the manual, change what you can, and then post specific questions on the remaining items and we'll help you out. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Tuning is a different story. You can try to do it using ATAP data, but the best way is to visit a wideband dyno or tune at the track.
Read the manual, change what you can, and then post specific questions on the remaining items and we'll help you out. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
