PCM Diagnostics & Tuning HP Tuners | Holley | Diablo

Problem after H&C install

Thread Tools
 
Search this Thread
 
Old Jul 2, 2002 | 10:23 PM
  #1  
Black2000WS6's Avatar
Thread Starter
Staging Lane
 
Joined: Nov 2001
Posts: 58
Likes: 0
From: Monument, CO
Default Problem after H&C install

I ran the car for about 700 miles and everything went fine. Now though when i step on the throttle all the way the gauges will reset themselves. Its like the computer is reseting itself. I went through and checked the battery and all of the grounds and everything was okay. Does anyone else have any suggestions. I am completely lost at this point.
Reply
Old Jul 3, 2002 | 10:31 AM
  #2  
PG's Avatar
PG
Teching In
 
Joined: Jan 2002
Posts: 15
Likes: 0
From: SA, TX
Default Re: Problem after H&C install

Did you mess around with the knock sensors, might be that if your knock sensors detect something crazy they will reset everything. I know cause when I would lauch hard on a lowered car, they ypipe would hit and knock sensors go haywire and resets everything. Just a thought.
Reply
Old Jul 3, 2002 | 11:32 AM
  #3  
Black2000WS6's Avatar
Thread Starter
Staging Lane
 
Joined: Nov 2001
Posts: 58
Likes: 0
From: Monument, CO
Default Re: Problem after H&C install

Thanks ill look into that. I know my ypipe has been hitting the transmission brace when i take off and accelerate.
Reply




All times are GMT -5. The time now is 09:29 PM.