PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

Opinion on A-Tap numbers

Thread Tools
 
Search this Thread
 
Old 07-06-2002, 04:03 PM
  #1  
TECH Fanatic
Thread Starter
iTrader: (17)
 
98_1LE's Avatar
 
Join Date: Dec 2001
Posts: 1,110
Received 1 Like on 1 Post

Default Opinion on A-Tap numbers

Help a newbie out. I would like to hear your opinion: http://chuckb.1le.net/01_trans_am/au...un_070602.html
Old 07-06-2002, 04:14 PM
  #2  
SSU Moderator
 
RyanJ's Avatar
 
Join Date: Nov 2001
Location: Austin, TX
Posts: 4,857
Likes: 0
Received 0 Likes on 0 Posts

Default Re: Opinion on A-Tap numbers

im what you call an idiot...but do you think you're IAT's were a little high. I live in dallas too and a 100mph i dont think i saw 120'.
Old 07-06-2002, 04:18 PM
  #3  
TECH Fanatic
Thread Starter
iTrader: (17)
 
98_1LE's Avatar
 
Join Date: Dec 2001
Posts: 1,110
Received 1 Like on 1 Post

Default Re: Opinion on A-Tap numbers

On the first run they were around 105-108. Then we let it idle for about 20 minutes, and then the IAT's went through the roof. I am sure the FIPK doesn't help matters.
Old 07-07-2002, 05:55 PM
  #4  
Teching In
 
hdrider's Avatar
 
Join Date: Jul 2002
Location: Cincinnati, Ohio
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Opinion on A-Tap numbers

You LT Trims look high -- seems like you should be able to get them lower with the MAFT.

O2's look ok at WOT, but your Spark Advance should be around 28 degrees -- they are quite low. Maybe due to high IAT's??

Dennis




All times are GMT -5. The time now is 02:19 AM.