PCM Diagnostics & Tuning HP Tuners | Holley | Diablo

Single Turbo Tuning for truck

Thread Tools
 
Search this Thread
 
Old Aug 12, 2002 | 03:08 PM
  #1  
99GMC Can's Avatar
Thread Starter
On The Tree
 
Joined: Aug 2002
Posts: 136
Likes: 0
From: Lillooet
Default Single Turbo Tuning for truck

I'm trying to find the cheapest way to tune my truck. The factory leans fuel during shifts so reprogramming is a must. This setup should make 5psi easy below 2000rpm. Superchips does the tuning for Vortech blower setups, but doesn't seem intrested in dealing with a turboed truck. I understand RAMCHARGERS carry an adjustable MAF that is built for turbo Buicks. It adjusts with boost. I wonder how well this would work? Extra fuel can easily be added through the stock injectors via piggy back pump and FMU. But with fuel cutting rev limits and shifting, things can go boom in a hurry.
Ed Wright says LS1 pistons melt really easy and won't touch it unless I bring it too him.

Are there no tuners closer to BC than Tulsa?
Reply
Old Aug 12, 2002 | 03:15 PM
  #2  
XLR8NSS's Avatar
Adkoonerstrator
iTrader: (4)
 
Joined: Nov 2001
Posts: 21,420
Likes: 0
From: Deep in the seedy underworld of Koonerville
Default Re: Single Turbo Tuning for truck

How close are you to Agostino Racing Engines?

They could probably help you out.

Here is their website and their address is at the bottom of the page.

www.agostino-racing.com

John <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />

PS - Why don't you stop in the truck forum and tell us a little more about your turbo setup. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Reply
Old Aug 12, 2002 | 06:12 PM
  #3  
99GMC Can's Avatar
Thread Starter
On The Tree
 
Joined: Aug 2002
Posts: 136
Likes: 0
From: Lillooet
Default Re: Single Turbo Tuning for truck

Agistino is in Toronto, I think. Last time I went there it was a three week trip. I need a place in BC, Alberta, Washington, Oregon?
Reply




All times are GMT -5. The time now is 08:07 PM.