Stock LS1 ve and spark table please?
Thread Starter
Teching In
Joined: Dec 2005
Posts: 42
Likes: 1
Stock LS1 ve and spark table please? Can someone send me a copy of a stock 2000 or any year 2001 and down LS1 engine spark table and VE table? I am in the process of building a LOW COST engine controller that hard working Joe's can afford. You shouldn't have to be a billionaire to fuel one of these engines. Why is it as soon as you mention LS1 or anything GEN III the price quintuples for everything?
Why does a dog lick himself?
For your average Joe, the average PCM and a little bit of
data fiddling suffice. So your low cost had better come in
below the price of tuner tools and include similar adjustability,
drivability and like that. That's a tall order.
For your average Joe, the average PCM and a little bit of
data fiddling suffice. So your low cost had better come in
below the price of tuner tools and include similar adjustability,
drivability and like that. That's a tall order.
Thread Starter
Teching In
Joined: Dec 2005
Posts: 42
Likes: 1
LS1 stuff too expensive. If you think any thing LS1 is cheap you probably are a triple over billionaire. Lets see, LS1 harness (harness only) from Howell $700 usd, or painless $1299 usd for controller and harness which is for stock engines only and cant be tuned. Plus if you want to tune it your self you’ll need hptuners or equivalent for around $499 for just 2 cars or a unjustly $8397 (full open) to be able to tune as many cars and trucks you want. These costs are horrendous and there is still tons more to spend for everything else just to get this engine swap in your car and running.
Lets look at my system..
ECM =$35
Harness =$75 to $120
Ls1 spark controller $303.00
Software - free online
-can tune any or as many gm, cars as you like for free
Free bin files.
Free ecu files
Free aldl files
DTC's can be checked and serviced by any garage in the world with a scanner.
Spped density or MAF
Cons of my system...
- Batch fire
Only looses 4 to six hp with batch fire dyno proven, but not as good emissions as sequential fire.
You do the math my system is waaaaaaaaaaaaaaaaaaaaaaay cheaper.
Lets look at my system..
ECM =$35
Harness =$75 to $120
Ls1 spark controller $303.00
Software - free online
-can tune any or as many gm, cars as you like for free
Free bin files.
Free ecu files
Free aldl files
DTC's can be checked and serviced by any garage in the world with a scanner.
Spped density or MAF
Cons of my system...
- Batch fire
Only looses 4 to six hp with batch fire dyno proven, but not as good emissions as sequential fire.
You do the math my system is waaaaaaaaaaaaaaaaaaaaaaay cheaper.
