I can't find an old post of mine! But here's the info. you guys wanted...
#1
TECH Enthusiast
Thread Starter
Join Date: Nov 2001
Location: Henderson, NV
Posts: 578
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It was a post i think titled "what is rich and what is lean" but i couldn't find it in the search. But in it i mentioned i had a 11.1:1 AF ratio on ATAP but that AF ratio on ATAP isn't reliable. So someone said go get your O2 readings and LTrims, so i did that tonight.
-oh and that post was made after i suspected that the FLPs i just put on was making me run rich. That was about 2 to 3 months ago. Soooo haveing said that: (i didnt know what this stuff was and my friend didn't really either. one had a decimal and one didn't.
OXSensor 1 volts (mv)- 933mv
OXSensor volts, bank 2 sensor 2 (mv)- 920.1mv
Now i dont know if his ATAP had a glitch, but my fuel trims, were at 0% is that good, i dont know? so from thiiis information am i rich?
-oh and that post was made after i suspected that the FLPs i just put on was making me run rich. That was about 2 to 3 months ago. Soooo haveing said that: (i didnt know what this stuff was and my friend didn't really either. one had a decimal and one didn't.
OXSensor 1 volts (mv)- 933mv
OXSensor volts, bank 2 sensor 2 (mv)- 920.1mv
Now i dont know if his ATAP had a glitch, but my fuel trims, were at 0% is that good, i dont know? so from thiiis information am i rich?
#2
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
02`s arent very reliable but according to yours ,you are slightly rich. 02 readings in the .870-.890 are usually considered good. your l trims should go to 0 @ wot