For those interested in self PCM Reprogramming and Hacking
09-18-2002, 05:13 PM
#1
LS1TECH Sponsor
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Chicago, IL
Posts: 2,404
Likes: 0
Received 0 Likes
on
0 Posts
For those interested in self PCM Reprogramming and Hacking My intentions have always been for the good of the community. I was going to put up a web page with lots of info, which I am doing now... but it's just not enough.. so I put up a message board too.
http://obd2.dxsoftware.com/cgi-bin/yabb/YaBB.pl
If you are interested in learning and actually tuning your own PCM or wish to help other projects, then I encourage you to check out the forum.
I think I covered the bases pretty well.
I know quite a few of you also wanted to try to program your own PCM's.. for you guys I will be posting some info shortly as well as a few binaries you guys can look at.
I'd really like to see some folks get together and work on custom DIY-EFI editors for a much more cost affordable price.
Enjoy!
ps. I cleared this post with PSJ First.
http://obd2.dxsoftware.com/cgi-bin/yabb/YaBB.pl
If you are interested in learning and actually tuning your own PCM or wish to help other projects, then I encourage you to check out the forum.
I think I covered the bases pretty well.
I know quite a few of you also wanted to try to program your own PCM's.. for you guys I will be posting some info shortly as well as a few binaries you guys can look at.
I'd really like to see some folks get together and work on custom DIY-EFI editors for a much more cost affordable price.
Enjoy!
ps. I cleared this post with PSJ First.
09-18-2002, 05:26 PM
#2
TECH Addict
Join Date: Nov 2001
Location: Live Oak, FL - in the woods where the creatures lurk.
Posts: 2,003
Likes: 0
Received 0 Likes
on
0 Posts
Re: For those interested in self PCM Reprogramming and Hacking Best of luck. I'll register and try to monitor the posts-although I probably can't contribute, hopefully I can learn something.
09-19-2002, 08:09 AM
#5
LS1TECH Sponsor
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Chicago, IL
Posts: 2,404
Likes: 0
Received 0 Likes
on
0 Posts
Re: For those interested in self PCM Reprogramming and Hacking Awesome!
I was hoping a few LS1 guys would join up.
I bet there are still a lot of LS1 lurkers out there who are already doing similar things. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
I was hoping a few LS1 guys would join up.
I bet there are still a lot of LS1 lurkers out there who are already doing similar things. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
05-20-2003, 12:01 PM
#7
LS1TECH Sponsor
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Chicago, IL
Posts: 2,404
Likes: 0
Received 0 Likes
on
0 Posts
Re: For those interested in self PCM Reprogramming and Hacking Lots more info added including some new flash files for those of you interested in this kind of stuff.
New location is:
http://pcm.dxsoftware.com/forum/
New location is:
http://pcm.dxsoftware.com/forum/
