threw a code(s)
02-08-2006, 04:56 PM
#1
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Aug 2005
Location: Hahira, GA
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
threw a code(s) Took it to advance auto to have it read. They said both rear o2's are out and one of the fronts too. I have had o2 sims in the rears for about a month now and never set a code before. Is it possible that the diagnostics just saw the sims and figured they weren't working? Maybe just the front? This is what the readout says. I have no idea what it means. Any Ideas?
History DTC P0133
O2 sensor
CTK Slow Response
(Bank 1 Sensor 1)
MIL REQUESTED
Since IGN NOT RUN
Since clear P/F
Current DTC P0135
O2 Sensor Heater
Circuit Malfunction
(Bank 1 Sensor 1)
MIL NOT REQUESTED
Since IGN NOT RUN
Since Clear P/F
Current DTC P0153
O2 Sensor
CKT Slow Response
(Bank 2 Sensor 1)
MIL NOT REQUESTED
Since IGN NOT RUN
Since Clear P/F
Verbatim......
History DTC P0133
O2 sensor
CTK Slow Response
(Bank 1 Sensor 1)
MIL REQUESTED
Since IGN NOT RUN
Since clear P/F
Current DTC P0135
O2 Sensor Heater
Circuit Malfunction
(Bank 1 Sensor 1)
MIL NOT REQUESTED
Since IGN NOT RUN
Since Clear P/F
Current DTC P0153
O2 Sensor
CKT Slow Response
(Bank 2 Sensor 1)
MIL NOT REQUESTED
Since IGN NOT RUN
Since Clear P/F
Verbatim......
Last edited by Rothman; 02-09-2006 at 02:56 PM.
02-09-2006, 12:13 PM
#3
TECH Senior Member
Don't know the answer but your not throwing codes for post cat 02's so the sims are working. I think the bottom description for slow response on Bank 2, Sensor 1 should read P0153? If so, you have current codes for both front 02s.