P0172,P0175
#1
TECH Fanatic
Thread Starter
iTrader: (27)
Join Date: Jul 2002
Location: jackson tn
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
P0172,P0175
why is my car throwing these code.the codes are rich in bank 1 and 2. {help}
<small>[ December 08, 2002, 11:13 PM: Message edited by: johnster ]</small>
<small>[ December 08, 2002, 11:13 PM: Message edited by: johnster ]</small>
Trending Topics
#8
TECH Fanatic
Thread Starter
iTrader: (27)
Join Date: Jul 2002
Location: jackson tn
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
Re: P0172,P0175
I have autotap the car and it is ok.I have a maft it is set on 12% lean.I have a hpp but I do not run the timeing.The 02 are reading about 9.06 wide open throttle this should be ok.It didn't happen while I was spraying it.
#9
TECH Fanatic
Thread Starter
iTrader: (27)
Join Date: Jul 2002
Location: jackson tn
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
Re: P0172,P0175
I have autotap the car and it is ok.I have a maft it is set on 12% lean.I have a hpp but I do not run the timeing.The 02 are reading about 9.06 wide open throttle this should be ok.It didn't happen while I was spraying it.
#10
TECH Fanatic
Thread Starter
iTrader: (27)
Join Date: Jul 2002
Location: jackson tn
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
Re: P0172,P0175
I have autotap the car and it is ok.I have a maft it is set on 12% lean.I have a hpp but I do not run the timeing.The 02 are reading about 9.06 wide open throttle this should be ok.It didn't happen while I was spraying it.
#11
TECH Fanatic
Thread Starter
iTrader: (27)
Join Date: Jul 2002
Location: jackson tn
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
Re: P0172,P0175
I have autotap the car and it is ok.I have a maft it is set on 12% lean.I have a hpp but I do not run the timeing.The 02 are reading about 9.06 wide open throttle this should be ok.It didn't happen while I was spraying it.
<small>[ December 09, 2002, 05:15 PM: Message edited by: johnster ]</small>
<small>[ December 09, 2002, 05:15 PM: Message edited by: johnster ]</small>
#13
Re: P0172,P0175
Have you tried resetting the PCM and seeing if the code happens again? Maybe it was a one time thing... Thats weird that its running rich while you have the MAFT set to lean.