help with maf numbers
01-19-2003, 12:25 AM
#1
Launching!
Thread Starter
Join Date: Feb 2002
Location: From Houston, Stationed in Norfolk
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
help with maf numbers i recently cleaned my maf sensors with some rubbing alcohol and ever since, my gas mileage has gone to ****. what should i be looking for with maf flow with the ATAP? IAC? what's normal. idle is also surging a little (~150rpm). any suggestions.
john
john
01-19-2003, 12:44 AM
#2
Staging Lane
Join Date: Feb 2002
Location: Newport, Michigan
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Re: help with maf numbers Exactly what did you do in cleaning your MAF????
I hope that you did not get down inside the MAF sensor near the measurement wires.
Also, look for a vacuum leak, they are responsible in many cases for a surging idle.
I hope that you did not get down inside the MAF sensor near the measurement wires.
Also, look for a vacuum leak, they are responsible in many cases for a surging idle.
01-19-2003, 12:49 AM
#3
Launching!
Thread Starter
Join Date: Feb 2002
Location: From Houston, Stationed in Norfolk
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Re: help with maf numbers i got some rubbing alcohol in a dropper and put a few drops on each of the sensors. i have a fipk and all the connections to maf and tb are rubber and very tight so i'm thinking that a vacuum leak isn't likely. is there any other way to get a vacuum leak. how can i use my ATAP to help me? TIA
john
john
