Injector Offset table - experts inside please
Thread Starter
TECH Apprentice
Joined: Jun 2002
Posts: 355
Likes: 0
From: Earth
Injector Offset table - experts inside please Are the parameters time vs voltage? If so, the higher the number = rich and the lower the number = lean?
At what point does modifying this table yield the best results, i.e. - idle, part throttle, WOT?
My '97 table is way different than the Z06's, yet the injectors are similar - anyone know the logic on that?
At what point does modifying this table yield the best results, i.e. - idle, part throttle, WOT?
My '97 table is way different than the Z06's, yet the injectors are similar - anyone know the logic on that?
Re: Injector Offset table - experts inside please the injector table is HUGE and from what i understand it really doesnt do jack crap unless you have a hard time on cold starts with huge injectors.
fwiw i have 42# svo's and have not touched the table and have no problems at all with injector timing.
fwiw i have 42# svo's and have not touched the table and have no problems at all with injector timing.
