h\c swap and now no tcs??
h\c swap and now no tcs?? ok after my ms3 cam and prc heads were installed my tcs will shut off when i turn on my car and stay off until i get the car up to highway speeds also after a few min of the car being at low speeds the tcs will turn back off
the only code i am throwing as of now is 106 for "insufficent vaccume" i figure that code is a result of the large am and needs to be dummied out but i was also wondering if the "insufficent vaccume code" is causing my tcs to turn off??
i figured i coulds just dummy out the table that controlls the 106 code but before i went ahead and did that is that code\problem related to my tcs issue???
-john
the only code i am throwing as of now is 106 for "insufficent vaccume" i figure that code is a result of the large am and needs to be dummied out but i was also wondering if the "insufficent vaccume code" is causing my tcs to turn off??
i figured i coulds just dummy out the table that controlls the 106 code but before i went ahead and did that is that code\problem related to my tcs issue???
-john
