A/F ratio ? - dyno graph inside
Thread Starter
Staging Lane
Joined: Nov 2001
Posts: 53
Likes: 0
From: Lafayette, CO
A/F ratio ? - dyno graph inside I don't know much about A/F ratios except that by adjusting it you can make more HP.
Looking at this graph I have, it looks like my A/F is high 13's.
But at the top it says Max Air/Fuel = 17.5
Can someone clue me in?
<img src="http://www.fuelslut.com/hosting/uploads/graph2.jpg" alt=" - " />
Looking at this graph I have, it looks like my A/F is high 13's.
But at the top it says Max Air/Fuel = 17.5
Can someone clue me in?
<img src="http://www.fuelslut.com/hosting/uploads/graph2.jpg" alt=" - " />
Re: A/F ratio ? - dyno graph inside hmmmmmm, dunno, looks like your power curve peak is sort of matching the A/F number, thus the 17.5 reading, but the A/F on the graph shows 13.5 across the board. If your A/F was 17.5..... <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />
Thread Starter
Staging Lane
Joined: Nov 2001
Posts: 53
Likes: 0
From: Lafayette, CO
Re: A/F ratio ? - dyno graph inside </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by lbz34:
<strong> I would richen it up to about 12.8 or so. Our dyno always says 17.5 at the top too. Don't know why????
Sean </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">What is the best way to richen it up, via MAFT?
And do i need to get it back on the dyno to do it (check it)?
<small>[ February 12, 2003, 05:17 PM: Message edited by: topfueluhl ]</small>
<strong> I would richen it up to about 12.8 or so. Our dyno always says 17.5 at the top too. Don't know why????
Sean </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">What is the best way to richen it up, via MAFT?
And do i need to get it back on the dyno to do it (check it)?
<small>[ February 12, 2003, 05:17 PM: Message edited by: topfueluhl ]</small>
