Perfecting the LTFT's
02-12-2003 | 06:12 PM
#1
Perfecting the LTFT's Hey guys,
I went ahead and scaled down my IFR table by 6% and now my LTFT's are between 0 and 10, but some FTC's are perfect while others are at 10. How can I tune just a certian FTC, or certain MAF Frequency? I logged some data using the MAF Frequency but the LS1Edit spreadsheet data for the MAF Freq is in 125Hz intervals and I'm not sure exactly which frequency falls into each category.
Example: In Edit there is a cell when Frequency = 2000 Hz, but what if my data shows that the LTFT's are really high in the range of 1925-1975, but they are really low from 1825-1900? What cell do I change?
<small>[ February 12, 2003, 06:13 PM: Message edited by: bomax182 ]</small>
I went ahead and scaled down my IFR table by 6% and now my LTFT's are between 0 and 10, but some FTC's are perfect while others are at 10. How can I tune just a certian FTC, or certain MAF Frequency? I logged some data using the MAF Frequency but the LS1Edit spreadsheet data for the MAF Freq is in 125Hz intervals and I'm not sure exactly which frequency falls into each category.
Example: In Edit there is a cell when Frequency = 2000 Hz, but what if my data shows that the LTFT's are really high in the range of 1925-1975, but they are really low from 1825-1900? What cell do I change?
<small>[ February 12, 2003, 06:13 PM: Message edited by: bomax182 ]</small>